Find the Right Machine
for Your Production
From 35T to 3,000T press brakes, 1kW to 20kW fiber lasers, shears and V-grooving machines — match your material, thickness and output to the right equipment.
Not sure which machine fits? Send us your material, thickness, part size and expected output — we'll recommend the right model.
Not sure which machine you need?
Match your task to the right equipment in seconds. Click any row to explore that machine category.
Four machine types, built for production
Each series covers a distinct range of tonnage, power and configuration. Browse by machine type or use the quick guide above to find your fit.
CNC Press Brake
High-precision metal bending
From 35T compact units to 3,000T heavy-duty frames. DELEM / ETABO CNC, multi-axis backgauge, full tooling ecosystem.
Best for: General bending, box forming, angle sections, and structural parts across most material types.
Fiber Laser Cutter
Fast, precise contour cutting
Sheet and tube laser from 1kW to 20kW. Exchange table, shuttle table, fully enclosed options. High cutting speed on mild steel, stainless and aluminium.
Best for: Complex contours, holes, profiles, and mixed material jobs where speed and precision matter.
Shearing Machine
High-volume straight cuts
Hydraulic guillotine shears and swing beam shears. NC and CNC controlled. Cutting 4mm to 40mm plate with consistent accuracy.
Best for: Repetitive straight cuts on plate — high throughput, lower cost per cut than laser.
V-Grooving Machine
Clean inner radii on sheet metal
Dedicated V-grooving for decorative stainless bending. Eliminates springback and surface scratching on architectural, kitchen and elevator panels.
Best for: Stainless inner bends, architectural panels, kitchen equipment and any application requiring clean, crack-free radii.
What actually matters when you're buying a machine
These are the factors that determine whether your purchase delivers — or becomes a liability.
48+ years of proven machines
Reduce your risk of buying an unproven machine
Founded in 1978. 50,000+ machines running in 100+ countries. We've seen your applications before — and built for them.
Custom configuration included
Get a machine that actually fits your factory layout
Backgauge travel, open height, table size, tooling packages, automation — configure to your floor plan, not our standard spec sheet.
Overseas installation & training
Your machine runs correctly from day one
Our technicians travel to your site for installation, calibration and operator training. No "figure it out yourself" after delivery.
DELEM & ETABO CNC systems
Same controls used by European manufacturers
Industry-standard DELEM and ETABO CNC systems. Operators familiar with Euro machines adapt quickly. Spare parts available globally.
ISO 9001 & CE certified
Passes your factory inspection and CE requirements
Full ISO 9001 quality management and CE compliance documentation available. CE mark on all EU-bound machines.
Fast quotation response
Know your budget within 24 hours of sending requirements
Send your material, thickness, part size and required output. Our engineering team responds with a machine recommendation and quotation within one business day.
Want to verify any of these points?
Industries we serve
We've supplied equipment to manufacturers across 100+ countries. Below are the most common applications — if yours isn't listed, tell us what you make and we'll recommend the right machine.
Electrical Enclosures
Precision bending of cabinet panels, mounting brackets and conduit components
Solar Mounting Structures
Thick plate cutting and bending for panel frames and mounting hardware
Kitchen Equipment
Decorative stainless bending for countertops, hoods and panel fabrication
HVAC Ductwork
High-volume straight cuts on galvanized sheet for duct sections and fittings
Automotive Components
Heavy structural bending and precision plate work for chassis and body parts
Steel Structure & Construction
Plate cutting and bending for beams, columns and structural connectors
Steel Furniture
Precision bending and cutting of tube and sheet for office and storage furniture
Architectural Metalwork
Decorative stainless profiles, feature panels and custom metal fabrications
Make an informed decision before you buy
These resources help you compare configurations, calculate requirements and understand trade-offs — so you ask better questions when talking to sales.
Press Brake Buying Guide
Understand tonnage formulas, backgauge options, CNC level choices and tooling ecosystems before you sign.
Tonnage Calculator
Calculate required bending force by material, thickness and die opening. Instant results, no sign-up needed.
How to Choose a Press Brake
Step-by-step decision framework: tonnage first, then bed length, then control system and automation level.
Fiber Laser Buying Guide
Compare power levels, bed sizes, exchange tables and tube cutting options. Covers all major configuration decisions.
Shearing Machine Selection Guide
Guillotine vs. swing beam, NC vs. CNC, cut quality and throughput trade-offs explained.
Machine Specifications Reference
Full parameter tables across all series — tonnage, stroke, speed, backgauge axes, power consumption.
Not sure which model fits your factory?
These guides help you narrow down. When ready, send us your part drawings and production parameters — our engineering team will recommend a specific model and configuration.
Common questions from international buyers
The answers most buyers want before sending an inquiry. If your question isn't here, ask our team directly.
Still have questions?
Ask Our Engineering TeamTo recommend the right machine, please send us:
- Material type & grade
- Thickness range (mm)
- Max. sheet or part size
- Expected daily output
- Drawings or sample photos
- Your country / power supply
Ready to get a specific recommendation?
Send us your requirements and our engineering team will respond with a machine model, configuration and indicative price — typically within one business day.